انت هنا الان : شبكة جامعة بابل > موقع الكلية > نظام التعليم الالكتروني > مشاهدة المحاضرة
الكلية كلية الهندسة
القسم الهندسة الميكانيكية
المرحلة 3
أستاذ المادة عصام زهير فاضل الحاج يوسف
4/28/2011 4:28:17 PM
In engineering practice, the machine parts are
subjected to various forces which may be due to either one
or more of the following:
1. Energy transmitted,
2. Weight of machine,
3. Frictional resistances,
4. Inertia of reciprocating parts,
5. Change of temperature, and
6. Lack of balance of moving parts.
The different forces acting on a machine part produces
various types of stresses, which will be discussed in this
chapter.
4.2 Load
It is defined as any external force acting upon a
machine part. The following four types of the load are
important from the subject point of view:
1. Dead or steady load. A load is said to be a dead or steady load, when it does not change in
magnitude or direction.
2. Live or variable load. A load is said to be a live or variable load, when it changes continually.
3. Suddenly applied or shock loads. A load is said to be a suddenly applied or shock load, when
it is suddenly applied or removed.
4. Impact load. A load is said to be an impact load, when it is applied with some initial velocity.
Note: A machine part resists a dead load more easily than a live load and a live load more easily than a shock
load.
Stress
When some external system of forces or loads act on a body, the internal forces (equal and
opposite) are set up at various sections of the body, which resist the external forces. This internal
force per unit area at any section of the body is known as unit stress or simply a stress. It is denoted
by a Greek letter sigma (?). Mathematically,
Stress, ? = P/A
where P = Force or load acting on a body, and
A = Cross-sectional area of the body.
In S.I. units, the stress is usually expressed in Pascal (Pa) such that 1 Pa = 1 N/m2. In actual
practice, we use bigger units of stress i.e. megapascal (MPa) and gigapascal (GPa), such that
1 MPa = 1 × 106 N/m2 = 1 N/mm2
and 1 GPa = 1 × 109 N/m2 = 1 kN/mm2
المادة المعروضة اعلاه هي مدخل الى المحاضرة المرفوعة بواسطة استاذ(ة) المادة . وقد تبدو لك غير متكاملة . حيث يضع استاذ المادة في بعض الاحيان فقط الجزء الاول من المحاضرة من اجل الاطلاع على ما ستقوم بتحميله لاحقا . في نظام التعليم الالكتروني نوفر هذه الخدمة لكي نبقيك على اطلاع حول محتوى الملف الذي ستقوم بتحميله .
|